Single row deep groove ball bearings

Contact Now

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise,Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

NSK 6200 Bearing

7 mm 6903-2RZ
17 mm 7

10 mm x 26 mm x 8 mm NTN 6000T2X5LLUC3/L453QTM Single row deep groove ball bearings

206 kN 34 mm
90 CX

10 mm x 26 mm x 8 mm NTN 6000LUAZC3/5K Single row deep groove ball bearings

2.6 Kg 23.4
133.35 mm 39.000 mm

10 mm x 26 mm x 8 mm NTN 6000LUC3 Single row deep groove ball bearings

64.8 mm 6.35 mm
12 mm 30000 r/min

10,000 mm x 26,000 mm x 8,000 mm NTN 6000LU Single row deep groove ball bearings

22,2 52 mm
20 52

10 mm x 26 mm x 8 mm NTN 6000LLUCM/5K Single row deep groove ball bearings

38 mm HK3814
38 45 mm

10 mm x 26 mm x 8 mm NTN 6000LLUC4/5K Single row deep groove ball bearings

29,5 mm 20 kN
0,018 Kg 14
1/17