SAF and SAW pillow blocks with bearings with a cylindrical bore

Contact Now

When subjected to a greater lateral load, a plummer block cannot be reliably secured with the tightening force of mounting bolts alone. To overcome this problem the end faces of the mounting bolt seat are secured with stoppers to lock the plummer block. With the plummer block used in this type of application, the end faces in contact with the stoppers are machined.The housings of NTN plummer blocks are made of class 3 gray cast iron (FC200).  summarizes the mechanical properties of this material. Cast iron materials boasts the greatest vibration dampening capability among various metal materials. They also perform well in a wider operating temperature range of –20 to 300˚C. For application involving shock load and vibration, class 2 spheroidal graphite cast iron (FCD450) or class 3 carbon cast steel (SC450) is used.

skf SAF 22215 SAF and SAW pillow blocks with bearings with a cylindrical bore

105.000 mm 49.00 mm
3400 rpm 196000 N

skf SAF 22330 SAF and SAW pillow blocks with bearings with a cylindrical bore

142000 N 3600 rpm
49.20 mm 176000 N

skf SAF 22326 TLC SAF and SAW pillow blocks with bearings with a cylindrical bore

4300 r/min 128 mm
305 kN 0.44

skf SAF 22232 TLC SAF and SAW pillow blocks with bearings with a cylindrical bore

3.2500 in Stainless Steel
0.7500 in 3440 lbf

skf SAW 23218 T SAF and SAW pillow blocks with bearings with a cylindrical bore

28.575 mm 203.4 N·m
SNW 34x5.13/16 3/4 NPT

skf SAF 1216 T SAF and SAW pillow blocks with bearings with a cylindrical bore

3740 kN 625 mm
520 mm 900 r/min

6.299 Inch | 160 Millimeter x 8.75 Inch | 222.25 Millimeter x 6.688 Inch | 169.875 Millimeter skf SAFS 22232 SAF and SAW pillow blocks with bearings with a cylindrical bore

Without Accessories 6300 rpm
20400 N 19500 N
1/17