Single row deep groove ball bearings

Contact Now

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise,Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Bearing Number	Bore Dia	Outer DIa	Width	Size
16 mm x 35 mm x 8 mm NTN 16003/16C3 Single row deep groove ball bearings	850 kN	16 mm x 35 mm x 8 mm	159 mm	300
15 mm x 32 mm x 8 mm SNR 16002.C3 Single row deep groove ball bearings	11.906	Bearing	0.41	0
17 mm x 35 mm x 8 mm SNR 16003 Single row deep groove ball bearings	14 mm	17 mm x 35 mm x 8 mm	30 mm	3,7 kN
17 mm x 35 mm x 8 mm NTN 16003 Single row deep groove ball bearings	355 mm	80 mm	210 mm	80
15 mm x 32 mm x 8 mm NTN 16002C3 Single row deep groove ball bearings	30	HUB145-9	3,5 mm	66,8 mm
15 mm x 32 mm x 8 mm NTN 16002 Single row deep groove ball bearings	15 mm x 32 mm x 8 mm	16	K25	5
15 mm x 32 mm x 8 mm SNR 16002 Single row deep groove ball bearings	15 mm x 32 mm x 8 mm	6300 kN	14 mm	BK1015
12 mm x 28 mm x 7 mm NTN 16001JRX Single row deep groove ball bearings	2,38	280 mm	268 mm	128 mm
12 mm x 28 mm x 7 mm NTN 16001JRXC3 Single row deep groove ball bearings	160	3600 kN	160 mm	1512 mm